70 3 PrintPrinting PDF Files without Using ContentsBridge UtilityPDF files can be sent directly to the printer using commands such as lpr and ftp instead ofContentsBridge Utility. When printing using commands, the following [PDF] settings on thecontrol panel become effective.Refer to• "[PDF]" (P. 98)Note• [2 Sided Print] appears only when the duplex unit (optional) is installed.• When printing using lpr command, the print quantity must be set also using lpr command. In such case,the [Quantity] setting on the control panel becomes invalid. If you do not specify the quantity using lprcommand, the printer recognizes the quantity as “1 set”.To print PDF files using lpr or ftp command, you must enable the printer’s LPD or FTP porton the control panel or CentreWare Internet Services (default: [Enable]).Refer to• "[LPD]" (P. 104)• "[FTP]" (P. 112)Supported Operating SystemsWindows NT 4.0/Windows 2000/Windows XP/Windows Server 2003To Print PDF FilesThe following explains how to print PDF files using lpr and ftp commands.Note• In the following examples, the characters entered are indicated in bold typeface.• Spaces are indicated with U. Using lpr CommandSupported OSWindows NT 4.0/Windows 2000/Windows XP/Windows Server 2003ExampleIn a command prompt, enter a command as follows.Example: A command for printing “event.pdf” when the printer’s IP address is192.168.1.100.• Quantity • Collated• 2 Sided Print • Output Size• Print Mode • Layout• PasswordC:\>lprU-SU192.168.1.100U-PUlpUevent.pdf key
