90 4 PaperSetting the Paper Sizes of the TraysUse the following procedure when setting non-standard paper sizes for the bypass tray ortrays 1 - 4. If you loaded non-standard-size paper into the tray 1, 2, 3 or 4, set the papersize dial to [*].Note• If you changed the paper loaded in the tray 1, 2, 3 or 4 from non-standard-size paper to standard-sizepaper, set the size of the paper with the paper size dial and not on the control panel.1. Press the panel to display the menu screen.2. Press the < > button until [Admin Menu] isdisplayed.3. Press the < > button to accept theselection.[Network/Port] is displayed.4. Press the < > button until [PrinterSettings] is displayed.5. Press the < > button to accept theselection.[Substitute Tray] is displayed.6. Press the < > button until [Paper Size] isdisplayed.7. Press the < > button to accept theselection.[Tray 1] is displayed.8. Press the < > button until the desired trayis displayed. Press the < > button to moveto the right field and then press the < >button.[Tray 1 Custom] is displayed.9. Press the button to confirmyour selection.[Portrait (Y)] is displayed.10. Press the < > button to select [Portrait(Y)].The current setting is displayed.MenuPrint LanguageMenuAdmin MenuAdmin MenuNetwork / PortAdmin MenuPrinter SettingsPrinter SettingsSubstitute TrayPrinter SettingsPaper SizePaper SizeTray 1 8.5x11*Paper SizeTray 1 CustomTray 1 CustomPortrait (Y)Portrait (Y)148mm*
