96 5 Control Panel MenusSetting Example:Changing the Power Saver Mode SettingUse the following procedure to set a value on the control panel.In this example, we will set [Low Power Timer] (an interval at which the printer switches tothe Low Power mode) to [60 Minutes].1. Press the menu screen.2. Press the < > button until [Admin Menu] isdisplayed.Note• If you went past the desired item, return to the item bypressing the < > button.3. Press the < > button to accept theselection.Move on to the lower hierarchy.Note• If you pressed the < > button on the wrong item,return to the previous screen by pressing the < >button.• To start over from the beginning, press the button.4. Press the < > button until [SystemSettings] is displayed.5. Press the < > button to accept theselection.Move on to the lower hierarchy.6. Press the < > button until [Low PowerTimer] is displayed.7. Press the < > button to accept theselection.The current set value appears.8. Press the < > or < > button to display [60Minutes].Note• Holding down the < > or < > button scrolls throughthe options in a circular fashion.9. Press the button to accept thevalue.MenuPrint LanguageMenuAdmin MenuAdmin MenuNetwork / PortAdmin MenuSystem SettingsSystem SettingsAudio TonesSystem SettingsLow Power TimerLow Power Timer5 Minutes*Low Power Timer60 MinutesLow Power Timer60 Minutes*
