28 1 Printer Environment Settings1.4 Enabling PortsSet all ports you want to use to [Enable] on the control panel.Use the following procedure to enable each port.The following procedure uses IPP as an example.1. Press the panel to display the menu screen.2. Press the < > button until [Admin Menu] isdisplayed.3. Press the < > button to accept theselection.[Network/Port] is displayed.4. Press the < > button to accept theselection.[Parallel] is displayed.5. Press the < > button until the desiredprotocol is displayed. (Example: IPP).6. Press the < > button to select theprotocol.[Port Status] is displayed.7. Press the < > button to accept theselection.The current setting is displayed.8. Press the < > button to display [Enable].9. Press the button to confirm theselection.The display shows [Reboot to applysettings] for 3 seconds and returns to thesetting screen.10. The setting is now complete.Reboot the printer by switching the poweroff and then on again.MenuPrint LanguageMenuAdmin MenuAdmin MenuNetwork / PortNetwork / PortParallelNetwork / PortIPPIPPPort StatusPort StatusDisable*Port StatusEnablePort StatusEnable*
