Clearing Paper Jams 51Paper Jam in the Bypass Tray1. Inspect the area of the paper tray where thepaper enters the printer and remove thejammed paper.If the paper is torn, check to make sure thatthere are no pieces of paper left inside.Important• If there are multiple sheets of paper loaded in thebypass tray, remove all of the paper.Paper Jam in Trays 1 - 4Important• Pulling out a tray without confirming the location of thepaper jam can tear paper and cause pieces of paper tobe left in the machine. This can cause a malfunction. Besure to check the location of the paper jam on the leftside of the control panel before clearing the jam.1. Pull out the paper tray indicated on thedisplay as the location of the paper jam.2. Remove the jammed paper and any paperthat is wrinkled.If the paper is torn, check to make sure thatthere are no pieces of paper left inside.3. Gently slide the tray back in as far as it willgo.Paper Jam Inside Cover AImportant• When removing paper, take care not to touch thetransfer belt (the black film belt) inside the cover on theupper left side. Scratches, dirt, or oil from your hands onthe belt can reduce print quality.• There may be some toner on the transfer roller.However, this does not affect image quality.1. Lower the bypass tray. Next, while raisingthe release lever, gently open cover A.