Xerox P H A S E R 7300 User Manual

Contents

Xerox P H A S E R 7300 User Manual Manual pdf 25 page image

Windows NT 4.x NetworkPhaser® 7300 Color Printer 2017. If the printer is not shared, click Next>. To share the printer, enter a Share Name, check the sharecheckbox, and then click Next>.18. At the next dialog it is recommended that you print a test print. Click Finish.19. Wait for the test print to print. A new dialog asks for confirmation of the test print; click Yes.20. Send a print job to the printer.21. Check the print job for print-quality. If print-quality problems exist or if your job did not print,refer to the Troubleshooting Guide on the Interactive Documentation CD-ROM to correct theproblem or access PhaserSMART from the Troubleshooting tab of your printer driver.Xerox TCP/IP Port MonitorThe Xerox installer for Windows automatically installs Xerox TCP/IP Port Monitor for thoseinstallations using the PCL 5c driver. The Xerox TCP/IP Port Monitor can be used to add or removeTCP/IP ports.Adding a port using Xerox TCP/IP Port Monitor1. To add a TCP/IP port, open the Printer Properties dialog box for the printer you would like toattach the new TCP/IP port.a. Click Start, scroll to Settings, and click Printers.b. Click your right-mouse button on the printer to which you want to attach the new TCP/IPport, and select Properties.2. Select the Details tab, and click the Add Port button.3. In the Add Port dialog box, select Other.4. From the list of available printer port monitors, select the Xerox TCP/IP Port, and then click theOK button.5. At this point, you enter the Xerox TCP/IP Printer Port Wizard. The wizard guides you step-by-step through the following procedures:a. Choosing a name for the new port.b. Identifying a printer by its DNS Name or IP Address.c. (Alternatively) Identifying a printer using the automatic Printer Discovery feature. ClickNext to proceed with the port installation.6. The wizard verifies the port name and printer address, and automatically configures the remainingport settings for you. Any errors detected in printer identification displays a dialog box requestingAdditional Information. In the Add Xerox TCP/IP Port window:a. Under Enter a Port Name, enter a unique name for the port being added.b. Under Enter a printer name or IP address, enter the printer’s host name or IP Address.c. Click Next.NoteTo locate Xerox printers on your local area network, select Auto Printer Discovery, andthen click Refresh. The Xerox TCP/IP Port Monitor searches the network for Xerox printersand displays them in a list. Select your desired printer from the list and click OK.