Xerox P H A S E R 7300 User Manual

Contents

Xerox P H A S E R 7300 User Manual Manual pdf 7 page image

IP AddressPhaser® 7300 Color Printer 2 PostScript Utility files can be used on hosts that do not have BOOTP or DHCP— see the ReadMefile on the Printer Installer and Utilities CD-ROM. The PC ReadMe file is in the UTILSdirectory of the Printer Installer and Utilities CD-ROM; the Macintosh ReadMe file is in theNetwork Utilities folder.NoteWhen two or more IP address methods are used simultaneously, the printer uses the firstaddress that it successfully obtains.Setting the IP address from the front panelFor information about using the front panel, refer to the Front Panel section of the Features Guide onthe Interactive Documentation CD-ROM.NoteDHCP must be set to OFF before you can set the IP address from the printer’s front panel.1. With Menus highlighted, press the OK key.2. Press the Down Arrow key to scroll to the Connection Setup Menu and press the OK key.3. Scroll to TCP/IP Address Menu by pressing the Down Arrow key and press the OK key.4. Scroll to TCP/IP Address by pressing the Up Arrow or Down Arrow key. Press the OK key.5. Verify the number of characters in the IP address. There should be 12 characters. IP addresses areentered in xxx.xxx.xxx.xxx format, where each segment represents a number from 0-255.6. By pressing the Up Arrow or Down Arrow key, scroll to the correct number for the first segmentof the address. Press the OK key to accept that segment.7. Repeat Step 6 for each remaining segment.8. Scroll to TCP/IP Network Mask by pressing the Up Arrow or Down Arrow key.9. By pressing the Up Arrow or Down Arrow key, scroll to the correct number for the first segmentof the address. Press the OK key to accept that segment.10. Repeat Step 9 for each remaining segment.11. Scroll to TCP/IP Gateway by pressing the Up Arrow or Down Arrow key.12. Scroll to the correct number for the first segment of the address by pressing the Up Arrow orDown Arrow key. Press the OK key to accept that segment.13. Repeat Step 12 for each remaining segment.14. To exit the menu system, scroll to Exit and press the OK key.Information Required for IP AddressingInformation CommentsInternet (IP) address for the printer Format is xxx.xxx.xxx.xxx, where xxx represents a decimal numberfrom 0 - 255.Network Mask If you are unsure, leave this blank; the printer chooses anappropriate mask.Default Router/Gateway address If you want to communicate with the printer from anywhere otherthan the local network segment, you need the router address.