Initial Setup14 Xerox® Phaser ® 3330 PrinterSystem Administrator GuideAccessing Administration andConfiguration SettingsYou can access the administration and configuration settings from the control panel or from theProperties tab in Xerox ® CentreWare® Internet Services. The control panel consists of a display andbuttons that you press to control the functions available on the printer. Xerox ® CentreWare® InternetServices is the administration and configuration software installed on the embedded Web server in theprinter. It allows you to configure and administer the printer from a Web browser.The administrator password is required when accessing locked settings in Xerox ® CentreWare® InternetServices or at the control panel. Most printer models have a default configuration that restricts accessto some settings. Access is restricted for settings on the Properties tab in Xerox ® CentreWare® InternetServices, and settings at the control panel.Accessing the Control Panel as a System Administrator1. At the printer control panel, press the Menu button.2. Use the arrow buttons to navigate through the menus.3. If your menu selection is locked, use the arrow buttons to enter the administrator password, thenpress OK. The default password is 1111.4. Make other selections as needed.Accessing Xerox ® CentreWare® Internet Services as a System AdministratorBefore you begin:• Locate your printer IP address using the Configuration Report. For details, see Printing theConfiguration Report on page 16.• Ensure that TCP/IP and HTTP are enabled. If you disabled either of these protocols, enable them atthe control panel before accessing Xerox ® CentreWare ® Internet Services.• Many features in Xerox ® CentreWare® Internet Services require an administrator user name andpassword. The system administrator user name is admin and the default password is 1111.Accessing Xerox ® CentreWare® Internet ServicesAt your computer, open a Web browser, in the address field, type the IP address of the printer, then pressEnter or Return.