Xerox Phaser 3330 System Administrator Manual

Also see for Phaser 3330: Quick use guide User guide Service manual Quick start guide

Contents

Xerox Phaser 3330 System Administrator Manual Manual pdf 20 page image

Network Connectivity20 Xerox® Phaser ® 3330 PrinterSystem Administrator GuideTCP/IPThis section includes:• Enabling TCP/IP at the Printer Control Panel ............................................................................................................ 20• Configuring the Network Address Manually at the Control Panel ................................................................... 21• Configuring IP Settings in Xerox ® CentreWare® Internet Services.................................................................. 21Computers and printers primarily use TCP/IP protocols to communicate over an Ethernet network.Generally, Macintosh computers use either TCP/IP or the Bonjour protocol to communicate with anetwork printer. For Macintosh OS X systems, TCP/IP is preferred. Unlike TCP/IP, however, Bonjourdoes not require printers or computers to have IP addresses.With TCP/IP protocols, each printer and computer must have a unique IP address. Many networksand cable and DSL routers have a Dynamic Host Configuration Protocol (DHCP) server. A DHCP serverautomatically assigns an IP address to every computer and printer on the network that is configuredto use DHCP.If you use a Cable or DSL router, see the documentation for your router for information on IP addressing.Enabling TCP/IP at the Printer Control PanelNote: By default, TCP/IP is enabled. If you disable TCP/IP, enable it at the printer control panelbefore you access Xerox ® CentreWare® Internet Services.1. At the printer control panel, press the Menu button.2. Navigate to Tools, then press OK.3. Navigate to Setup, then press OK.4. Navigate to Network Settings, then press OK.5. To enable TCP/IPv4, navigate to TCP/IPv4, then press OK.a. Navigate to IPv4, then press OK.b. Navigate to On, then press OK.6. To enable TCP/IPv6, navigate to TCP/IPv6, then press OK.a. Navigate to IPv6, then press OK.b. Navigate to On, then press OK.