Xerox Phaser 3330 System Administrator Manual

Also see for Phaser 3330: Quick use guide User guide Service manual Quick start guide

Contents

Xerox Phaser 3330 System Administrator Manual Manual pdf 45 page image

SecurityXerox® Phaser ® 3330 Printer 45System Administrator GuideConfiguring Authentication SettingsConfiguring Local Authentication SettingsWhen you configure local authentication, users prove their identity by typing a user name and passwordat the control panel or in Xerox ® CentreWare® Internet Services. The printer compares the usercredentials to the information stored in the user database. If you have a limited number of users,or do not have access to an authentication server, use this authentication method.Configuring Convenience Authorization SettingsWhen Convenience Authorization is enabled, users swipe a pre-programmed identification card througha Proximity Card Reader at the control panel. To use this method, purchase and install a USB card readerand an authentication server that supports the Xerox ® Convenience Authentication API.To configure access rights using Convenience Authorization:1. In Xerox ® CentreWare® Internet Services, click Properties > Login/Permissions/Accounting.2. Click Login Methods.3. Set the login method to Convenience authentication.4. For Convenience Authorization Setup, click the Pencil icon.5. For Server Communication, select an address type. Type the appropriately-formatted address orhost name of your server and change the default port number as needed.6. For Path, type the HTTP path that your authentication server provides.7. Click Save.Configuring a Card Reader Policy1. In Xerox ® CentreWare® Internet Services, click Properties > Login/Permissions/Accounting.2. Click Login Methods.3. Set the login method to Convenience authentication.4. For Card Reader Detection Policy, click the Pencil icon.5. For USB Card Reader Detection Policy, select an option.− To allow printer use when the USB card reader is disconnected, select No.− To prevent printer use when the USB card reader is disconnected, select Yes.6. Click Save.