3Installation and SetupSee also:Installation Guide packaged with your printer.System Administrator Guide at www.xerox.com/office/3330docs.Installation and Setup OverviewBefore printing, ensure that your computer and the printer are plugged in, turned on,and connected. Configure the initial settings of the printer, then install the driver softwareand utilities on your computer.You can connect to your printer directly from your computer using USB, or connect toa network using an Ethernet cable or wireless connection. Hardware and cablingrequirements vary for the different connection methods. Routers, network hubs, networkswitches, modems, Ethernet cables, and USB cables are not included with your printerand must be purchased separately. Xerox recommends an Ethernet connection because,typically, it is faster than a USB connection, and it provides access to Xerox® CentreWare®Internet Services.NoteIf the Software and Documentation disc is not available, you can download the latestdrivers from www.xerox.com/office/3330drivers.Related Topics:Selecting a Location for the PrinterSelecting a Connection MethodConnecting the Printer to the NetworkConfiguring Network SettingsInstalling the Software3-1Xerox® Phaser® 3330 PrinterUser Guide
