Xerox Phaser 3330 User Manual
Also see for Phaser 3330: Quick use guideSystem administrator guideService manualQuick start guide
                                                                                                                  | |
Contents
| 
Wireless NetworkIf your network includes a wireless router or wireless access point, you can connect theprinter to the network with a wireless connection. A wireless network connection providesthe same access and services as a wired connection provides. A wireless networkconnection is typically faster than USB and allows direct access to the printer settingswhen using Xerox® CentreWare® Internet Services.USBIf you connect the printer to one computer and do not have a network, use a USBconnection. A USB connection offers fast data speeds, but typically not as fast as anEthernet connection. In addition, a USB connection does not provide access to Xerox®CentreWare® Internet Services.Connecting the Printer to the NetworkUse a Category 5 or higher Ethernet cable to connect the printer to the network. AnEthernet network is used for one or more computers and supports many printers andsystems simultaneously. An Ethernet connection provides direct access to printer settingsusing Xerox® CentreWare® Internet Services.To connect the printer:1. Connect the power cord to the printer, and plug the cord into an electrical outlet.2. Connect one end of a Category 5 or higher Ethernet cable to the Ethernet port onthe printer. Connect the other end of the Ethernet cable to a correctly configurednetwork port on a hub or router.3. Turn on the printer.For details on configuring network settings, refer to the System Administrator Guideat www.xerox.com/office/3330docs.Connecting to a Computer Using USBTo connect using USB, you need Windows 7, Windows 8 or later, Windows Server 2008or later, or Macintosh OS X version 10.9 or later.To connect the printer to the computer using a USB cable:1. Connect the B end of a standard A/B USB 2.0 cable to the USB Port on the left sideof the printer.2. Connect the A end of the USB cable to the USB port on the computer.3. If the Windows Found New Hardware Wizard appears, select Cancel.4. Install the print drivers. For details, refer to Installing the Software.Turning On/Off the PrinterBefore turning on the printer, ensure that the power cord is plugged into the printer andwall outlet, and that the the power switch is in the off position.3-3Xerox® Phaser® 3330 PrinterUser GuideInstallation and Setup |
Related manuals for Xerox Phaser 3330
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine