LabelsNoteYou can print labels only from the Bypass Tray.Guidelines for Printing LabelsCautionDo not use any sheet where labels are missing, curled, or pulled away from the backingsheet. It could damage the printer.• Use labels designed for laser printing.• Do not use vinyl labels.• Do not feed a sheet of labels through the printer more than once.• Do not use dry gum labels.• Print only on one side of the sheet of labels. Use full sheet labels only.• Store unused labels flat in their original packaging. Leave the sheets of labels insidethe original packaging until ready to use. Return any unused sheets of labels to theoriginal packaging and reseal it.• Do not store labels in extremely dry or humid conditions or extremely hot or coldconditions. Storing them in extreme conditions can cause print-quality problems orcause them to jam in the printer.• Rotate stock frequently. Long periods of storage in extreme conditions can causelabels to curl and jam in the printer.• In the print driver software, select Label as the paper type.• Before loading labels, remove all other paper from the bypass tray.Loading Labels in the Bypass TrayTo load labels in the bypass tray:1. Open the bypass tray.2. Move the width guides to the edges of the tray.Xerox® Phaser® 3330 Printer4-14User GuidePaper and Media
