SolutionsProbable CausesIn the print driver Properties, select 2-SidedPrint on the Paper/Output tab.Incorrect settingPaper Tray Fails to CloseSolutionProbable CauseSome debris or an object is blocking the tray.The paper tray does not close fully.Printing Takes Too LongSolutionsProbable CausesIt takes more time to print on certain types ofspecial paper. Ensure that the paper type is setproperly in the driver and at the printer controlpanel.The printer is set to a slower printing mode. Forexample, the printer could be set to print onHeavyweight paper.It takes time for printing to start when theprinter is exiting of Power Saver mode.The printer is in Power Saver mode.Determine if a print spooler or a computersharing the printer is buffering all print jobs andthen spooling them to the printer. Spooling canslow print speeds. To test the speed of theprinter, print some information pages such asthe Office Demo Page. If the page prints at therated speed of the printer, you could have anetwork or printer installation issue. For addi-tional help, contact the system administrator.The way the printer was installed on the net-work could be an issue.Wait. No action needed.The job is complex.Change the print-quality mode in the printdriver to Standard.The print-quality mode in the driver is set toEnhanced.Printer Fails to PrintSolutionsProbable CausesTo clear the error, follow the onscreen prompts.If the error persists, contact your Xerox representative.The printer has an error.Load paper into the tray.The printer is out of paper.Replace the empty toner cartridge.A toner cartridge is empty.7-3Xerox® Phaser® 3330 PrinterUser GuideTroubleshooting
