Cleaning the ExteriorClean the exterior of the printer once a month.CautionDo not spray detergent directly on the printer. Liquid detergent could enter the printerthrough a gap and cause problems. Never use cleaning agents other than water or milddetergent.1. Wipe the paper tray, output tray, control panel, and other parts with a damp, softcloth.2. After cleaning, wipe with a dry, soft cloth.NoteFor stubborn stains, apply a small amount of mild detergent to the cloth and gentlywipe the stain off.Ordering SuppliesWhen to Order SuppliesA warning appears on the control panel display when the Toner Cartridge or the DrumCartridge are near their replacement time. Verify that you have replacements on hand.It is important to order these items when the messages first appear to avoid interruptionsto your printing. An error message appears on the control panel display when the TonerCartridge or the Drum Cartridge must be replaced.Order supplies from your local reseller or go to www.xerox.com/office/3330supplies.CautionUse of non-Xerox supplies is not recommended. The Xerox Warranty, Service Agreement,and Total Satisfaction Guarantee do not cover damage, malfunction, or degradationof performance caused by use of non-Xerox supplies, or the use of Xerox supplies notspecified for this printer. The Total Satisfaction Guarantee is available in the UnitedStates and Canada. Coverage could vary outside these areas. Please contact your Xeroxrepresentative for details.Viewing Printer Supply StatusYou can check the status and percentage of life remaining for your printer supplies atany time using the control panel.1. At the printer, press the Menu button.2. Using the Down arrow button, select Information.3. Press the Right arrow button.4. Using the Down arrow button, select Supplies Info. Press the Right arrow button.A list of Supplies information appears. Using the Up/Down arrow buttons, select yourchoice to view status.Xerox® Phaser® 3330 Printer6-2User GuideMaintenance