Paper MisfeedsSolutionsProbable Causes• Remove the misfed paper and reposition itproperly in the tray.• Adjust the paper guides in the tray to matchthe size of the paper.The paper is not correctly positioned in the tray.Remove some of the paper. Do not load paperpast the fill line.The paper tray is too full.Adjust the paper guides in the tray to matchthe size of the paper.The paper guides are not correctly adjusted tothe paper size.Do not reuse the paper. Remove the paper, andload the tray with new paper.The tray contains warped or wrinkled paper.Remove the moist paper and replace it withnew, dry paper.The paper is moist from humidity.Use only Xerox approved paper. For details, seeSupported Paper.Using paper of the wrong size, thickness, ortype.Label and Envelope MisfeedsSolutionsProbable CausesDo not use any sheet where labels are missing,curled, or pulled away from the backing sheet.Labels are missing, curled, or are pulling awayfrom the backing sheet.• Load label sheets according to the instruc-tions from the manufacturer.• Load labels print side up in the bypass tray.• Do not load labels in the high-capacityfeeder.The label sheet is facing the wrong way in thetray.• Load envelopes in the bypass tray with theprint side up, flaps closed, and the shortedge leading into the printer.• Ensure that the width guides rest looselyagainst the edge of the envelopes withoutrestricting their movement.Envelopes are loaded incorrectly in the bypasstray.The heat and pressure of the laser printingprocess can cause wrinkling. Use supportedenvelopes. For details refer to Guidelines forPrinting Envelopes.Envelopes are wrinkling.Xerox® Phaser® 3330 Printer7-22User GuideTroubleshooting
