Windows NT 4.xPhaser™ 4500 Laser Printer3-22Configuring the Printer1. Insert the Printer Installer and Utilities CD-ROM into the computer’s CD-ROM drive,then click Have Disk.2. Click the Browse button and select the directory containing the Windows NT drivers.3. Select the *.INF file, then click Open. Verify that the path and filename are correct, thenclick OK.4. Select the correct printer, then click OK.5. Enter a name for the printer, select whether you want that printer to be the default, thenclick OK.6. Select one of these options:■ If the printer is not shared, click Next.■ If the printer is shared, enter a Share Name, check the Share box, then click Next.Printing a Test PageYou are prompted to print a test page.1. Select one of these options:■ Click Yes to print a test page, then click Next.■ Click No if you do not want to print a test page, then click Next.2. Select one of these options:■ Click the Finish button if the data presented is correct. Proceed to step 3.■ Click the Back button to correct the data if incorrect, then click Finish when the datais correct. Proceed to Step 3.3. If you printed a test page, you are prompted to confirm that the test page printed:■ Click Yes if the test page printed successfully.■ Click No if the test page did not print or printed incorrectly. Proceed to step 4.4. Note the print-quality of the print job. If print-quality problems exist or if the job does notprint, go to Reference/Troubleshooting on the User Documentation CD-ROM.
