Windows 98 and Windows MePhaser™ 4500 Laser Printer3-26Quick CD-ROM Install Steps1. Insert the Printer Installer and Utilities CD-ROM into the computer’s CD-ROM drive. Ifyour PC is set to autorun, the installer launches automatically. If it does not launch, do thefollowing:a. Click Start, then click Run.b. In the Run window, type: :\INSTALL.EXE.2. Select your desired language from the list.3. Select Install Printer Driver.4. Click I Agree to accept the Xerox Software License Agreement.5. In the Select Printer dialog box, the default Use Walk-Up Technology (recommendedfor network printers) is selected. Click Next.6. Follow the Use Walk-Up Technology instructions displayed.7. Click Exit Program.NoteIf the Walk-Up Technology dialog box remains onscreen after you have completedSteps 1–6, click the Back button, then click Select from the following discoveredprinters. Follow the onscreen prompts to complete the installation procedure.Other Methods of InstallationInstall your printer on a Windows 98 or Windows Me network using one of these methods:■ Xerox TCP/IP Port Monitor■ PhaserPort SoftwareXerox TCP/IP Port MonitorThe Windows installer installs the Xerox TCP/IP Port Monitor. The Xerox TCP/IP PortMonitor can be used to add or remove TCP/IP ports.Adding a Port1. Open Printer Properties for the printer you would like to attach to the new TCP/IP port.2. Click Start, click Settings, then click Printers.3. Right-click the printer to be attached to the new TCP/IP port, then click Properties.4. Click the Details tab, then click the Add Port button.5. Select Other.6. From the list of available printer-port monitors, select the Xerox TCP/IP Port, then clickOK.
