Novell NetWarePhaser™ 4500 Laser Printer3-40Novell NetWare Software Step-By-Step1. Verify that CentreWare DP and a Phaser printer driver have been loaded on theworkstation.2. Click Start, click Settings, then click Printers to verify that the printer is installed.Launching CentreWare DP1. Click Start, click Programs, then click CentreWare DP.2. Select the desired printer. If a communications error message appears, your printer is notable to communicate with your workstation. Verify your printer’s settings, then return tothis document.3. With the printer selected, click the Printer drop-down list, then select Advanced Setup.4. Select one of the following connection methods:■ Novell Directory Services■ Bindery5. Verify that the information displayed is also contained on the “Configuration Page”.Verify these items:a. The queue name of the Phaser printer is set to service. If necessary, create a newqueue to test the printer.b. The Primary Server lists the server name on the “Configuration Page”Printing a Document1. Click the Tools drop-down list.2. Select the Send File... menu item, then select the appropriate directory and file fordownloading. Verify that this is a valid file with no errors.3. Click OK. The file is sent to the printer. If the document does not print, review the NovellMenu settings on the “Configuration Page”.Verifying the Network Settings1. At the CentreWare DP main screen, click the Printer drop-down list, click Properties,then click Connections.2. Click the Network Card tab. A new dialog box displays information about frame typeand connectors.3. Verify that the printer is enabled and the connector and frame type are correct. If changesare made, reset the printer from the front panel.4. Re-print a test page. If the test print does not print, go to www.xerox.com/office/support.
