Error Messages and Codes 3-7Consumable/Routine Maintenance Item Errors (Continued)Install or Lock [C][M][Y][K] Toner Cartridge 208, 209, 210, 211 3-41Install or Reseat Imaging Unit 212 3-33Install or Reseat Transfer Roller 213 3-35Install or Reseat Fuser 214 3-38Remove Ribbon from [C][M][Y][K] Toner Cartridge;Unlock And Lock Cartridge To Clear215, 216, 217, 218 3-45Metered Toner is not Enabled 223 3-53Replace [C][M][Y][K] Toner Cartridge 224, 225, 226, 227 3-42Tray and Media ErrorsInsert Tray 2Insert Tray [3][4][5]160161, 162, 1633-543-55Out of Paper Load Tray 1(MPT) with [size] [type]Out of Paper Load Tray [2][3][4][5] with [size] [type]165166, 167, 168, 1693-573-58Output Tray is Full, Unload Paper 191 3-60Media Mismatch ErrorsWrong Paper Size Load Tray 1 (MPT) with [size] [type]Wrong Paper Size Load Tray [2][3][4][5] with [size] [type]176177, 178, 179, 1803-613-63Configuration ErrorsInvalid Configuration Card _ 3-64Configuration Card Missing _ 3-64Fatal ErrorsLaser Failure [code] 7, 8, 9, 10, 11 3-66Density Sensor Failure [code] 13, 14, 15, 16 3-67Fuser Failure [code]Fuser Failure 44Fuser Failure [code]40, 41, 42, 434445, 46, 473-683-693-70Fuser Fan Failure 50 3-71Rear Fan Failure 51 3-72Fan Failure 52 3-73Fuser Firmware Failure 76 3-74Engine Firmware Failure [code]Engine Firmware Failure [code]70, 71, 73, 74, 7972, 783-753-75Image Density Error 77 3-84Error Message Summary (Continued)Control Panel Message Code Go to Page
