Xerox VersaLink C400 User Manual

Also see for VersaLink C400: Security guide Firmware installation instructions Firmware installation instructions Quick use guide Installation guide

Xerox VersaLink C400 User Manual Manual pdf 11 page image

Electrical SafetyGGeenneerraall GGuuiiddeelliinneessWARNING:• Do not push objects into slots or openings on the printer. Touching a voltage point orshorting out a part could result in fire or electric shock.• Do not remove the covers or guards that are fastened with screws unless you are installingoptional equipment and are instructed to do so. Power off the printer when performingthese installations. Disconnect the power cord when removing covers and guards forinstalling optional equipment. Except for user-installable options, there are no parts thatyou can maintain or service behind these covers.The following are hazards to your safety:• The power cord is damaged or frayed.• Liquid is spilled into the printer.• The printer is exposed to water.• The printer emits smoke, or the surface is unusually hot.• The printer emits unusual noise or odors.• The printer causes a circuit breaker, fuse, or other safety device to activate.If any of these conditions occur, do the following:1. Power off the printer immediately.2. Disconnect the power cord from the electrical outlet.3. Call an authorized service representative.PPoowweerr CCoorrddUse the power cord supplied with your printer.• Plug the power cord directly into a properly grounded electrical outlet. Ensure that each end of thecord is connected securely. If you do not know if an outlet is grounded, ask an electrician to checkthe outlet.WARNING: To avoid risk of fire or electrical shock, do not use extension cords, powerstrips, or power plugs for more than 90 days. When a permanent outlet receptaclecannot be installed, use only one factory-assembled extension cord of the appropriategauge for each printer or multifunction printer. Always adhere to national and localbuilding, fire, and electrical codes regarding length of cord, conductor size, grounding,and protection.• Do not use a ground adapter plug to connect the printer to an electrical outlet that does not havea ground connection terminal.• Verify that the printer is plugged into an outlet that is providing the correct voltage and power.Review the electrical specification of the printer with an electrician if necessary.• Do not place the printer in an area where people can step on the power cord.Xerox® VersaLink® C400 Color PrinterUser Guide11Safety