Xerox WORKCENTRE 3210 User Manual

Also see for 3210 - workcentre b/w laser: Features Brochure & specs Product safety data sheet Quick start guide Brochure

Contents

Xerox WORKCENTRE 3210 User Manual Manual pdf 11 page image

10_SafetyWARNING: The metallic surfaces in the fuserarea are hot. Please use caution when removingpaper jams from this area and avoid touching anymetallic surfaces.Do Not Do These:• Never use a ground adapter plug to connect the equipmentto a power outlet that lacks a ground connection terminal.• Never attempt any maintenance function that is notspecifically described in this documentation.• Never obstruct ventilation openings. They are provided toprevent overheating.• Never remove covers or guards that are fastened withscrews. There are no operator serviceable areas withinthese covers.• Never locate the machine near a radiator or any other heatsource.• Never push objects of any kind into the ventilation openings.• Never override or "cheat" any of the electrical or mechanicalinterlock devices.• Never place this equipment where people might step on ortrip on the power cord.• This equipment should not be placed in a room unless properventilation is provided. Please contact your local Authorizeddealer for further information.Electrical Safety Information1. The power receptacle for the machine must meet therequirements stated on the data plate on the rear of themachine. If you are not sure that your electrical supplymeets the requirements, please consult your local powercompany or an electrician for advice.2. The socket outlet shall be installed near the equipment andshall be easily accessible.3. Use the power cable that is supplied with your machine. Donot use an extension cord or remove or modify the powercord plug.4. Plug the power cable directly into a correctly groundedelectrical outlet. If you are not sure whether or not an outletis correctly grounded, consult an electrician.5. Do not use an adapter to connect any Xerox equipment toan electrical outlet that lacks a ground connection terminal.6. Do not place this equipment where people might step or tripon the power cable.7. Do not place objects on the power cable.8. Do not override or disable electrical or mechanical interlockdevices.9. Do not push objects into slots or openings on the machine.Electrical shock or fire may result.10. Do not obstruct ventilation openings. These openings areused to provide proper cooling to the Xerox machine.Electrical Supply1. This product shall be operated from the type of electricalsupply indicted on the product's data plate label. If you arenot sure that your electrical supply meets the requirements,please consult a licensed electrician for advice.WARNING: This equipment must be connectedto a protective earth circuit. This equipment issupplied with a plug that has a protective earthpin. This plug will only fit into an earthed electricaloutlet. This is a safety feature. If you are unable toinsert the plug into the outlet, contact a licensedelectrician to replace the outlet.2. Always connect equipment to a correctly grounded poweroutlet. If in doubt, have the outlet checked by a qualifiedelectrician.Disconnect DeviceThe power cable is the disconnect device for this equipment. It isattached to the back of the machine as a plug-in device. Toremove all electrical power from the equipment, disconnect thepower cable from the electrical outlet.Emergency Power OffIf any of the following conditions occur, turn off the machineimmediately and disconnect the power cable(s) from theelectrical outlet(s). Contact anauthorized Xerox ServiceRepresentative to correct the problem: