Using Windows PostScript Driver (WorkCentre 3220)245 Using Windows PostScriptDriver (WorkCentre 3220)If you want to use the PostScript driver provided with your system CD-ROM to print a document.PPDs, in combination with the PostScript driver, access printer featuresand allow the computer to communicate with the printer. An installationprogram for the PPDs is provided on the supplied software CD-ROM.Printer SettingsYou can use the printer properties window, which allows you to accessall of the printer options you need when using your printer. When theprinter properties are displayed, you can review and change the settingsneeded for your print job.Your printer properties window may differ, depending on your operatingsystem. This Software User’s Guide shows the Properties window forWindows XP.Your printer driver Properties window that appears in this User’s Guidemay differ depending on the printer in use.NOTES:• Most Windows applications will override settings you specify in theprinter driver. Change all print settings available in the softwareapplication first, and change any remaining settings using the printerdriver.• The settings you change remain in effect only while you are using thecurrent program. To make your changes permanent, make them inthe Printers folder.• The following procedure is for Windows XP. For other Windows OS,refer to the corresponding Windows User's Guide or online help.1. Click the Windows Start button.2. Select Printers and Faxes.3. Select your printer driver icon.4. Right-click on the printer driver icon and selectPrinting Preferences.5. Change the settings on each tab, click OK.AdvancedYou can use advanced settings by clicking the Advanced button.• Paper/Output this option allows you to select the size of thepaper loaded in the tray.• Graphic this option allows you to adjust the print quality for yourspecific printing needs.• Document Options this options allow you to set the PostScriptoptions or printer features.Using HelpYou can click from the upper right corner of the window, and thenclick on any setting.
