Getting started2.53 Squeeze the paper width guide, as shown and slide it tothe stack of paper until it lightly touches the side of thestack.N OTES:• Do not push the paper width guide far enough to cause thematerials to warp.• If you do not adjust the paper width guide, it may causepaper jams.Making connections1 Connect a USB cable to the USB connector on yourmachine2 Connect the other end of the cable to the USB port on yourcomputer.See your computer User’s Guide if you need help.To the USB port on your computerN OTE: When using the USB connection, your machineprovides two USB modes; Fast and Slow. Fast is the defaultmode. Some PC users may experience poor USB function inthe default mode. If this occurs, select Slow mode to achievesuccessful results. For details about changing the USB mode,see page 9.7.Turning the machine on1 Plug one end of the supplied power cord into the powerreceptacle on the machine and the other end into aproperly grounded AC outlet.2 Press the power switch to turn the machine on. warmingup please wait appears on the display indicating that themachine is now on.To view your display text in another language, seepage 2.6.CAUTION:• The fuser area inside of the rear cover of your machinebecomes very hot when in use. Take care not to burn yourfingers when you access this area.• Do not disassemble the machine with power on. If you do,you may receive an electric shock.
