Xerox WorkCentre 3119 User Manual

Also see for WorkCentre 3119: Service manual Service manual

Contents

Xerox WorkCentre 3119 User Manual Manual pdf 16 page image

Getting started2.6Setting up the machine systemOverview of control panel menusThe control panel provides access to various menus to set upthe machine or use the machine’s functions. They can beaccessed by pressing button.Refer to the following diagram.Reduce/EnlargeDarknessOriginal TypeSpecial Copy OffCloneAuto FitID Card Copy2 UPPosterToner SavePaper Setting Paper SizePaper TypeCopy Setup Default-ChangeTimeoutReportMachine Setup LanguagePower SaveUSB modeMaintenance Clean DrumClear SettingsChanging the display languageTo change the language that appears on the control panel,follow these steps:1 Press button until Machine Setup appears on the topline of the display.2 Press button when Language appears.3 Press the scroll button ( or ) to select the language youwant and press button.4 Press button to return to Standby mode.Using the save modesToner save modeToner save mode allows your machine to use less toner on eachpage. Activating this mode extends the life of the tonercartridge beyond what one would experience in the normalmode, but it reduces print quality.1 Press button until Toner Save appears on the topline of the display.2 Press the scroll button ( or ) until On appears and pressbutton.N OTE: When PC-printing, you can also turn on or off TonerSave mode in the printer properties. See the SoftwareSection.Power save modePower save mode allows your machine to reduce powerconsumption when it is not in actual use. You can turn thismode on and select a length of time for which the machinewaits after a job is printed before it switches to a reduced powerstate.1 Press button until Machine Setup appears on thetop line of the display.2 Press the scroll button ( or ) until Power Save appearsand press button.3 Press the scroll button ( or ) until On appears and pressbutton.4 Press the scroll button ( or ) to select the time settingyou want and press button.5 Press button to return to Standby mode.