Xerox WorkCentre 3119 User Manual

Also see for WorkCentre 3119: Service manual Service manual

Contents

Xerox WorkCentre 3119 User Manual Manual pdf 24 page image

Loading original documents and paper3.62 Adjust the manual feeder guides to the width of the printmaterial without bending it.3 After loading paper, you need to set the paper type andsize for the manual feeder. See page 3.6 for copying or theSoftware Section for PC-printing.N OTE: The settings made from the printer driver override thesettings on the control panel.4 If you want to use the rear cover, open the rear cover.Tips on using the manual feeder• Print materials should be loaded face up with the top edgegoing into the manual feeder first and be placed in thecenter of the tray.• Always load only the print materials specified in theSpecifications on page 3.2 to avoid paper jams and printquality problems.• When you print on 76 x 127 mm (3 x 5 inches) sized mediaon the manual feeder, open the rear cover to use the rearcover.• Make sure to open the rear cover when you print ontransparencies. If not, they may tear while exiting themachine.Setting the paper size and typeAfter loading paper in the paper tray, you need to set the papersize and type using the control panel buttons. These settingswill apply to Copy mode. For PC-printing, you need to select thepaper size and type in the application program you use on yourPC.1 Press button until Paper Setting appears on the topline of the display.2 Press button when Paper Size appears.3 Press the scroll button ( or ) to select the paper trayyou want to use and press button.4 Press the scroll button ( or ) to find the paper size youare using and press button.5 Press button to return to the upper level.6 Press the scroll button ( or ) to select Paper Type andpress button.7 Press the scroll button ( or ) to find the paper type youare using and press button.8 Press button to return to Standby mode.Selecting an output locationThe machine has two output locations: the rear cover (face up)and the output tray (face down).To use the output tray, make sure that the rear cover is closed.To use the rear cover, open the rear cover.N OTES:• If paper coming out of the output tray has problems, such asexcessive curl, try printing to the rear cover.• To avoid paper jams, do not open or close the rear coverwhile the machine is printing.Printing to the output tray (Face down)The output tray collects printed paper face down, in the orderin which the sheets were printed. The tray should be used formost print jobs.If you use paper which is not long enough to reach the outputtray, use the scan unit.To use the scan unit:1 Lift the scan unit. A tab automatically springs up tosupport the cover.