Xerox WorkCentre 3119 User Manual

Also see for WorkCentre 3119: Service manual Service manual

Contents

Xerox WorkCentre 3119 User Manual Manual pdf 28 page image

Copying4.3N OTE: If you press button or no buttons are pressed forapproximately 30 seconds, the machine cancels the copy joband returns to Standby mode.7 Press button to begin copying.2-UP copyingThis feature prints 2 original images reduced to fit onto onesheet of paper.1 Place the document to be copied on the document glassand close the cover.2 Press button until Special Copy appears on the topline of the display.3 Press the scroll button ( or ) until 2-UP appears andpress button.4 Customize the copy settings including copy size, darkness,and original type, by using the control panel buttons. Seepage 4.1.N OTE: You cannot adjust the copying size using the Reduce/Enlarge menu while making a 2-UP copying.5 Press button to begin copying.Your machine begins scanning the front side and will thendisplay Set Next Page Press Start.6 Place the second document to be copied on the documentglass.7 Press button to begin copying.N OTE: 2-UP copying reduces your original document by 50%.Poster copyingThis feature prints an image onto 9 sheets of paper (3x3). Youcan paste the printed pages together to make one poster-sizeddocument.1 Place the document to be copied on the document glassand close the cover.2 Press button until Special Copy appears on the topline of the display.3 Press the scroll button ( or ) until Poster appears andpress button.4 Customize the copy settings including copy size, darkness,and original type, by using the control panel buttons. Seepage 4.1.5 Press button to begin copying.1 2N OTE: You cannot adjust the copy size using the Reduce/Enlarge menu while making a poster.Your original document is divided into 9portions. Each portion is scanned and printedone by one in the following order:Setting the time out optionYou can set the time the machine waits before it restores thedefault copy settings, if you do not start copying after changingthem on the control panel.1 Press button until Copy Setup appears on the top lineof the display.2 Press the scroll button ( or ) until Timeout appears andpress button.3 Press the scroll button ( or ) to select the time settingyou want.Selecting Off means that the machine does not restore thedefault settings until you press button to begincopying, or button to cancel.4 Press button to save your selection.5 press button to return to Standby mode.