Layout AdjustmentWorkCentre™ 5735/5740/5745/5755/5765/5775/5790Workflow Scanning130Layout AdjustmentThe Layout Adjustment options allow you to manipulatethe scanned image and enhance the appearance and styleof your output. To access the Layout Adjustment options,select Services Home and Workflow Scanning. Then selectthe Layout Adjustment tab.Original OrientationUse to specify the orientation of the originals being scanned. The orientation of the images on theoriginals must match the orientation selected. The device uses this information to identify if theimages require rotating to produce the required output.• Portrait Originals the images on the originals are in aportrait orientation. A graphical representation of theimage orientation is shown when the option isselected.• Landscape Originals the images on the originals arein a landscape orientation. A graphical representationof the image orientation is shown when the option isselected.Select Save to save your selections and exit.Original SizeOriginal Size allows you to specify automatic size detection of the originals, mixed size originals, or thespecific size of the image to be scanned. The options are:• Auto Detect is the default setting and enables automatic size sensing. The size detected ismatched to a standard size paper.• Preset Scan Areas allows you to define the size of your original from a list of pre-set, standardoriginal sizes. You can view the list by using the scroll bar.• Custom Scan Areas is used to enter a specific area forscanning. Measure the area to be scanned on theoriginal and enter the X and Y axis measurements intothe fields provided. Only the area specified is scanned.• Mixed Size Originals allows you scan documentscontaining different size pages. The pages must be thesame width, like A4 LEF and A3 SEF (8.5x11” LEF and11x17” SEF), other combinations are shown on thescreen.Select Save to save your selections and exit.
