Output FormatWorkCentre™ 5735/5740/5745/5755/5765/5775/5790Copy61Format and StyleTo specify the orientation, style and printing requirementsfor the selected annotations, select the Format option:• Orientation use to specify if the annotation is printedPortrait or Landscape.• Font Size use the -/+ buttons to select a font size forthe annotation, or select the entry box and enter thesize required using the numeric keypad.• Appearance is used to specify if the annotated text isOpaque or Transparent. Opaque text is placed on top of the copy output and no image is visibleunder the annotated text. Transparent text allows the copy image to remain visible under theannotated text.• Side 2 options are used to specify the printing requirements if the output is 2-sided.• Same as Side 1 settings will apply to both Side 1 and Side 2 of your output.• Mirror Side 1 Flip on Long Edge output will open from right to left like a book, with thebinding edge on the left. The position of the annotation on Side 2 will mirror Side 1. Forexample, if a page number is positioned in the bottom left corner of Side 1, it will appear inthe bottom right corner of Side 2.• Mirror Side 1 Flip on Short Edge output will open from bottom to top like a calendar, withthe binding edge at the top. The position of the annotation on Side 2 will mirror Side 1. Forexample, if a page number is positioned in the bottom left corner of Side 1, it will appear inthe top left corner of Side 2.Select Save to save your selections and exit.Transparency SeparatorsUse Transparency Separators to interleave each printed transparency with a blank or printed sheet ofpaper from a specified paper tray.1. Select the Transparency Separators button on the Output Format tab.2. Select the Transparency Separators option required:• Off• Blank Separators adds a blank sheet to eachtransparency.• Imaged Separators adds a copy of eachtransparency.3. Select the paper tray containing the paper for theseparators. The selected paper should match the sizeand orientation of the transparencies. If necessary, select More... to access all the paper trayoptions.4. Select Save to confirm the selections.5. Load your originals into the document feeder and select Start to run the job.For instructions on loading transparencies into the paper tray, refer to Media Types on page 233 ofPaper and Media.
