FaxWorkCentre 6400 Multifunction PrinterSystem Administrator Guide1345. On the Defaults page, you can change other settings:• Server Fax: You can adjust the following settings:• 2-Sided Scanning• Content Type• How Original was Produced• Resolution• Image Quality: You can adjust the following settings:• Lighten / Darken• Suppression• Layout Adjustment: You can adjust the following Settings:• Original Orientation• Original Size.• Filing Options: has the following setting that can be adjusted; Delay Start.To change any feature settings, within each setting area click the Edit button, select the feature to bechanged then click the Save button to return to the Server Fax: Defaults screen.Troubleshooting Server FaxNotes:• Configure your printer on the network or resolve any networking issues beforeattempting to use the Server Fax feature.• Server Fax and Embedded Fax cannot be running at the same time. If one is enabled, theother will not function.If you are experiencing problems sending a fax from the control panel, check the following:1. Verify the printer is installed and functioning on the network. For details, see The InstallationWizard on page 15.2. Verify TCP/IP is enabled. For details, see Enabling TCP/IP on page 22.3. Ensure Fax settings are configured. For details, see Configure Server Fax Default Settings onpage 133.4. Ensure the Server Fax File Repository is setup correctly. For details, see Configure a Server Fax FilingRepository on page 131.5. Verify the user account and password created for the Server Fax feature are correct and have theappropriate permissions to create directories and write files to the filing location.See also: For more help, see the Online Support Assistant at www.xerox.com/office/WC6400support.
