SecurityWorkCentre 6400 Multifunction PrinterSystem Administrator Guide66IPsecInternet Protocol Security (IPsec) is a group of protocols used to secure Internet Protocol (IP)communications by authenticating and encrypting each IP data packet. It allows you to control IPcommunication by creating protocol groups, policies, and actions for the following:Enabling IPsecNotes:• Secure HTTP (SSL) must be enabled with an installed digital certificate before you canenable IPsec.• If your printer is locked, you must log in as a system administrator. For details, seeAccessing CentreWare IS on page 17.1. In CentreWare IS, click Properties > Security > IP Sec.2. Under Enablement, select Enabled.3. Click Apply.Managing ActionsUse actions to more specifically manage how IPSec controls dependent protocols.Note: If your printer is locked, you must log in as a system administrator. For details, see AccessingCentreWare IS on page 17.Creating a New Action1. In CentreWare IS, click Properties > Security > IPSec.2. Click Actions.3. Click Add New Action.4. On the Step 1 of 2 page, under IP Action Details, type in the Name. This field is required.5. In the Description field, type a description for the action, if desired.6. Under Keying Method, select Manual Keying or Internet Key Exchange (IKE).Note: Select Manual Keying if client devices are not configured for or do not support IKE.• DHCP v4/v6 (TCP and UDP)• DNS (TCP and UDP)• FTP (TCP)• HTTP (Scan Out, TCP port 80)• HTTPS (Scan Out, TCP port 443)• HTTPS (Web Server, TCP port 443)• ICMP v4/v6• IPP (TCP port 631)• LPR Print (TCP port 515)• Port 9100 Print (TCP port 9100)• SMTP (TCP/UDP port 25)• SNMP (TCP/UDP port 161)• SNMP Traps (TCP/UDP port 162)• WS-Discovery (UDP port 3702)• Up to 10 additional services
