Network ConfigurationWorkCentre 6400 Multifunction PrinterSystem Administrator Guide388. Under Search Timeout, select Use LDAP Server Timeout to allow the printer to time out basedon the LDAP server settings, or select Wait, and type in the number of seconds between 5 and 100that the printer will wait before timing out. The default is 30 seconds.Note: If you are having trouble retrieving results from your LDAP server, use the Wait option.9. If your primary LDAP server is connected to additional servers, select LDAP Referrals to includethose LDAP servers in your searches.10. Under the Perform Query on heading, select:• Surname and Given Name Fields: This option allows you to search for the user’s last nameand first name.• Mapped Name Field: This option allows you to specify how the name fields are mapped.After you apply this setting, click User Mappings to define the field mapping. For details, seeDefining User Mappings below.11. Click Apply.Configuring Contexts for LDAPContexts are a defined starting points in an LDAP database from which the search function beginssearching. Contexts are used with the Authentication feature. You can configure the printer toautomatically add an authentication context to the Login Name provided by the user.Note: If your printer is locked, you must log in as a system administrator. For details, see AccessingCentreWare IS on page 17.1. In CentreWare IS, click Properties > Connectivity > Protocols > LDAP.2. Click the Contexts button under the LDAP title.3. Type details in the Default Login Context field.4. Click Apply.Defining User MappingsLDAP servers display different results depending on how they implement mappings. Editing themapping allows you to fine-tune server search results.Note: Internet Fax users must ensure that the Internet Fax field is not set to No MappingsAvailable in the drop-down menu. This setting prevents the LDAP Address Book from displayingon the Internet Fax screen on the printer's control panel. Select Mail as the Internet Fax setting.1. In CentreWare IS, click Properties > Connectivity > Protocols > LDAP.2. Under Search, type the name of the user you want to search for in the Enter Name field, thenclick Search.If a match occurs, the user’s information displays.3. Use the drop-down menus under Imported Heading to remap fields as needed.Note: Headings are defined by your LDAP server’s schema.
