FaxingWorkCentre 6400 Multifunction PrinterUser Guide109Server FaxIf you have a fax server connected to your network, you can send a document to a fax machine withouthaving to connect a dedicated telephone line to the printer.When you send a server fax, the document is scanned and sent to a location on your network (arepository). The fax server can then send the fax over a phone line to a fax machine (phone number).Before you can send a Server Fax, the Server Fax service must be enabled in CentreWare IS, and a FaxRepository must be configured.Configuring the Printer to Send a Server FaxTo enable the Server Fax service:1. From your computer, launch CentreWare IS by typing your printer’s IP address into your Webbrowser’s address field.2. After CentreWare IS loads, select the Properties tab.3. Log in as a system administrator. Enter the User ID (admin) and Password (1111) (default) andclick Login.4. From the Services menu on the left, select Server Fax.Note: For more information, see the System Administrator Guide and CentreWare IS help.Configuring a Fax RepositoryTo configure a fax repository:1. From your computer, launch CentreWare IS by typing your printer’s IP address into your Webbrowser’s address field.2. After CentreWare IS loads, select the Properties tab.3. Log in as a system administrator. Enter the User ID (admin) and Password (1111) (default) andclick Login.4. From the Services menu on the left, select Server Fax.5. Select Fax Repository Setup.The printer can transfer scanned files to the repository using one of the following protocols:• FTP• SMPB• HTTP• HTTPS• STMPNote: For more information on configuring a fax repository, see the System Administrator Guide.
