PrintingWorkCentre 6400 Multifunction PrinterUser Guide55• In the printer driver, select either Labels as the paper type or Tray 1 as the paper source.Printing on Glossy PaperPrint glossy paper single-sided only and from Tray 1.To order paper, transparencies, or other specialty media, contact your local reseller or go to the XeroxSupplies website for your printer: www.xerox.com/office/WC6400supplies.Guidelines• Do not open sealed packages of glossy paper until you are ready to load them into the printer.• Leave glossy paper in the original wrapper, and store unopened packages in the original shippingcarton until ready to use.• Remove all other paper from the tray before loading glossy paper.• Load only the amount of glossy paper you plan to use and remove the unused portion from thetray when you are finished printing. Replace the unused portion in the original wrapper and seal forlater use.• Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy paper tocurl and jam in the printer.• In the printer driver, select either Gloss Coating or Heavyweight Gloss Coating as the paper type,or Tray 1 as the paper source.Printing on Custom Size PaperIn addition to the wide variety of standard paper sizes that you can use for printing, you can also printon custom size paper within the following dimensions.Note: Print custom size paper from Tray 1 only. If inserted one page at a time, long edge 2-sidedpaper can be up to 356 mm (14.0 in.)Single Sided Printing 2-Sided PrintingShort edge 92–216 mm (3.6–8.5 in.) 176–216 mm (7.0–8.5 in.)Long edge 148–356 mm (5.8–14.0 in.) 257–300 mm (10.1–11.8 in.)Weight 60–210 g/m 2 60–150 g/m 2
