102Server FaxServer Fax OverviewThe Server Fax feature enables you to fax documents without having a telephone line directly connectedto your multifunction device. This is achieved by sending the documents to a separate, networked faxserver with its own links to the telephone system.It is assumed that you already purchased and enabled the Scanning option. If you did not, contact yourXerox Representative to purchase same. A hard disk and network card are required device hardware.Their presence can be confirmed by printing a Configuration Report, as stated in the Configuration Reporttopic in the Network Connectivity section of this guide.The Server Fax option also needs to be purchased from your Xerox Representative, then enabled on themultifunction device using a software key (see Enabling Options with Software Keys in this guide).As stated in this section, you will be setting up a network connection to a Xerox-certified, third party faxserver (server running fax management software) which will receive, store, and redirect incomingdocuments to the server's fax boards, or other destinations determined by fax server software setup.Note: The FAX or Internet Fax (iFAX) features and the Server Fax feature are mutually exclusive. IfServer Fax is enabled, even if the machine is equipped with an internal fax board, scanning to theinternal FAX will be disabled. While the Server Fax feature is enabled, the iFAX service will also bedisabled. Also note that Mailbox to FAX (a Job Flow Sheet destination) and Direct Fax (LAN Fax) arenot supported when Server Fax is enabled. You can use Internet Services, however, to select whichFax Service to enable, as described in this section.
