186Configure Remote Authentication for LDAPRefer to your LDAP server documentation for the full range of information that can be entered into thisLDAP dialog to fully support both E-mail applications and authentication using your LDAP server.The path to the LDAP dialog is as follows:At Your Workstation:1. With the Authentication Configuration web page still running, click Configure next to the server youwish to use for Authentication. If not still running, perform steps 2 and 3 below.2. If the web page is not still running, open your Web browser and enter the TCP/IP address of themachine in the Address or Location field. Press Enter.3. Click the Properties tab. Note that (as of February 2007) you can either return to the Security folderand the Authentication Configuration hot link (discussed on the previous page), or use the alternativepath, stated below.4. Select the Remote Authentication Server / Directory Service folder in the list of hot links, selectAuthentication System and pick LDAP from the drop-down list. Click Apply.5. Select LDAP Server / Directory Service.6. Enter the Primary Server IP address (or host name) in the box supplied. Note: If entering a fullyqualified host name (for example, ldapserver.xerox.com), make sure that the specified domain namematches the device’s TCP/IP configuration (domain name shown under DNS on the device’sConfiguration Report).7. Enter the Primary Server Port Number (default of 389).8. If available, decide whether or not to use encryption (Authentication with SSL) when accessing theLDAP server.9. For Authentication Method, choose either Direct Authentication or Authentication of User Attributes.Direct Authentication sets authentication with the LDAP server with the user ID and passwordsupplied by the user. If you choose Direct Authentication, when a user presses a button at the devicefor a restricted service, they will be prompted for their LDAP credentials. If you select Authenticationof User Attributes, authentication will be based on the attributes entered into this dialog, such assamAccountName or uid, for Attribute of Login User Name, or mail for Attribute of Typed User Name.Note that there are a number of other LDAP attributes that can be entered into this dialog.10. The Search Login Name box can be left blank.11. The Search Password and Re-enter Search Password boxes can be left blank.