Initial Setup24 WorkCentre 7800 Series Multifunction PrinterSystem Administrator GuideInstalling Optional Software FeaturesWhen you purchase an optional software feature, enable it by providing a feature installation key. Somefeatures come with an activation code that you use to get a feature installation key. Go to the Xerox ®Software Activation Portal website at www.xeroxlicensing.xerox.com to enter the activation code. Thewebsite generates a feature installation key that you can use to enable the feature.You can also install optional software features by sending a print file. You can install features onmultiple printers by sending a formatted .csv file as a print job to the printers. A Xerox representativecreates this file and provides installation instructions.Installing a Software Feature in CentreWare Internet Services1. In CentreWare Internet Services, click Properties > General Setup.2. Click Feature Installation.3. Under Feature Installation Key Entry, click Enter Installation Key, or under Action, next to thefeature you want to install, click Install.4. Type the key.5. Click Apply.Supplies Plan Activation CodeYour Xerox ® equipment supplier offers supplies and service plans such as PagePack ® and eClick ®.PagePack ® and eClick ® are cost-per-page-based programs that include all service and supplies for yourprinter in one contract. If you have enrolled in a supplies program, you must activate the supplies plan atregular intervals. To enable your printer for your purchased plan, contact your Xerox ® equipment supplierto get a Supplies Activation Code. Contact a Xerox representative to get your supplies plan activationcode.1. In CentreWare Internet Services, click Properties > General Setup.2. Click Supplies Plan Activation Code.3. Type the code, then click Apply.For more information about Xerox ® supplies and service plans, contact your Xerox representative.
