Network ConnectivityWorkCentre 7800 Series Multifunction Printer 31System Administrator GuideTo verify the wireless status and see the wireless IP address, print a Configuration Report. For details, seeConfiguration Report on page 22. See the Connectivity Physical Connections, and Connectivity Protocols,TCP/IPv4 sections of the report.Note: When you switch from a wired connection to a wireless connection, the IP address of theprinter changes. The connection to CentreWare Internet Services through your Web browser closes.To reconnect to CentreWare Internet Services, type the new IP address or host name of your printerin the address field of your Web browser.Configuring Wireless Settings ManuallyIf the printer does not detect your wireless network, configure wireless settings manually and provideinformation about your wireless network.1. In CentreWare Internet Services, click Properties > Connectivity > Setup.2. Next to Xerox ® Wireless Network Interface, click Edit.3. To configure IPv4, IPv6, and DNS settings, on the Wireless Profile page, next to IP, click Edit. Theprinter uses separate IP settings for wired and wireless network connections. For details, see IP onpage 33.4. On the Wireless Profile page, next to Wireless Settings, click Edit.5. On the Wireless Settings page, click Join Other Network.6. Under Network Name, type the name of your network.7. Under Security Mode, select the security method that your wireless network uses.8. Configure the following security mode settings as needed:− Under WEP Setting and Key, select the bit strength and key.− Under Encryption Algorithm, select an encryption method. Auto automatically detects thealgorithm that your wireless network uses.− Under Authentication Method, select the authentication method that your wireless networkuses.− To require the printer to validate certificates, under Server Validation, select the certificate thatyou want to use. Install the validation server root certificate on the Security Certificates pageat Properties > Security > Security Certificates. For details, see Security Certificates onpage 102.− Under Device Certificate (TLS) - Authentication Certificate, select the device certificate thatyou want to use. Install the device certificate on the Security Certificates page at Properties >Security > Security Certificates. For details, see Security Certificates on page 102.− Under Outer Identity, configure the external User ID.− Under User Name, type the user name that the printer uses to access the wireless network.− Under Password, type and confirm a password. Click Select to save new password as needed.9. Click Save.10. Navigate back to the Setup page, then click Properties > Connectivity > Setup.11. Next to Xerox ® Wireless Network Interface, click Make Active.
