Xerox WorkCentre M24 System Administrator Manual

Also see for WorkCentre M24 Color: Service manual User guide Quick connect guide Quick start guide Reference guide

Xerox WorkCentre M24 System Administrator Manual Manual pdf 187 page image

Configure SMBConfigure SMB N5.51. Open your Web browser and enter the TCP/IP address of the Printer in the Address or Location field.Press Enter.2. Click the Properties button or Tab.3. Click the plus symbol (+) to the left of the Protocol Settings file folder.4. Select SMB in the directory tree.5. The available selections include:A text box indicating Workgroup name.A text box indicating the SMB Host name.A text box indicating the Administrator name.A text box indicating the Administrator Password.A text box confirming the Administrator Password.An entry box for the maximum number of connections allowed, labeled MaximumSessions.A TBCP Filter checkbox (displayed when PostScript is enabled).An enabling checkbox for Auto Driver Download, enabling the Printer to push a driver toa client.An enabling checkbox for supporting Unicode (supplying the Host name and Workgroupname in Unicode characters during SMB transmission).An enabling checkbox for Auto Master Mode.An enabling checkbox for Encrypt Password (during SMB transmission).6. Accept the default value, or enter a value from 3 to 10, for maximum number of connections allowed inMaximum Sessions.7. Accept the Workgroup name shown, or enter in your own workgroup name.8. Type the SMB Host Name or accept the name shown.9. Enter in the appropriate Administrator name and password if desired (such as for password-protectedaccess in a NetBEUI workgroup).10. Click the Apply New Settings button to apply setting changes, or the Restore Settings button to returnsettings to their previous values.Note: Setting changes are not applied until you restart the Printer. There is a convenient Reboot button on theStatus Tab of Internet Services.