AC701 Evaluation Board www.xilinx.com 81UG952 (v1.4) August 6, 2019Appendix ADefault Switch and Jumper SettingsUser GPIO DIP Switch SW2See Figure 1-2 callout 23 for location of SW2. Default settings are shown in Figure A-1 and detailsare listed in Table A-1.X-Ref Target - Figure A-1Figure A-1: SW2 Default SettingsTable A-1: SW2 Default Switch SettingsPosition Function Default1 GPIO_DIP_SW0 OFF2 GPIO_DIP_SW1 OFF3 GPIO_DIP_SW2 OFF4 GPIO_DIP_SW3 OFFUG952_aA_01_100712SW21OFF Position = 0ON Position = 12 3 4Send Feedback
