ZC706 Evaluation Board User Guide www.xilinx.com 109UG954 (v1.5) September 10, 2015Installing the ZC706 Board in a PC Chassis7. The ZC706 board is taller than standard PCIe cards. Ensure that the height of the card isfree of obstructions.8. Connect the ATX power supply to the ZC706 board using the ATX power supply adaptercable as shown in Figure D-1:a. Plug the 6-pin 2 x 3 Molex connector on the adapter cable into J22 on the ZC706board.b. Plug the 4-pin 1 x 4 peripheral power connector from the ATX power supply into the4-pin adapter cable connector.9. Slide the ZC706 board power switch SW1 to the ON position. The PC can now bepowered on.Send Feedback
