Xtender XTS 900-12 User Manual
                                                        | |
Contents
| 
Studer Innotec SAXtenderUser manual V4.6.0 103.5.1 Fastening of the XTH modelFirst fix the mounting bracket (26) supplied with the device using 2 Ø < 6-8 mm >screws**.Then hang the Xtender on the bracket. Fasten the unit permanently using 2 Ø <6-8 mm> screws** onto the two notches located at the underside of the case.Dimensions of the appliances are given on Fig 2a of the appendix 1.3.5.2 Fastening of the XTM modelFirst fasten the top screw (6-8mm **) without washer on a solid wall (concrete or metallic wall) up toa distance of 2mm between head and wall. Hang the device from the screw. If deemed necessary,the upper support screw can be fully tightened after hanging the device. In theory, this is onlynecessary in mobile applications. To access the upper support screw to fully tighten it, remove theupper plastic grate (see 27 fig. 2a of the appendix).Dismount the lower plastic grate of the device giving access to the wiring compartment. Carefullyfix the device with two screws (Ø 6-8 mm) in the two holes located at the bottom left and right of thewiring compartment.If the Xtender is installed in a closed cabinet this must have sufficient ventilation to guarantee anambient temperature that conforms to the operation of the Xtender.**: These items are not delivered with the device.It is imperative to ensure complete and safe fastening of the device. A device that is simplyhung may detach and cause severe damage.3.5.3 Fastening of the XTS modelThe XTS enclosure must be first mounted on the support plate withthe 4 screws and washer delivered with the appliance accordingwith figure aside. Then the unit can be fixed on a heavy-dutysupport (concrete or metallic wall) and positioned vertically withcable glands oriented down. An external ventilation unit (ECF-01,p. 37) can be installed on top of the unit before or after wallmounting.A distance of at least 20 cm in between and/or around the XTH devices is required in orderto guarantee sufficient ventilation.The envelope of the XTS can reach temperatures higherthan 60°C when used for a long period near its maxpower level. These high temperatures may remainpresent during several tens of minutes after stopping theunit. It is recommended to choose a place of installationin a restricted access area, away from children or anyunauthorized person. |
manualsdatabase
Your AI-powered manual search engine