Xtender XTS 900-12 User Manual
                                                        | |
Contents
| 
Studer Innotec SAXtenderUser manual V4.6.0 359 ACCESSORIES9.1 REMOTE CONTROL RCC-02/-03An RCC-02/-03 remote control, display and programming unit can be connected to the Xtender viaone of the two RJ45-8-type "Com. Bus" (3) connectors.Only Studer CAN compatible accessories and devices (mentioned in chapters 9 and 10)can be connected to the RJ45-8 connectors, excluding any other connections such as LAN,Ethernet, ISDN or other.Connecting a non-compatible device may cause serious damage not covered by themanufacturer's warranty.These connectors may only be used for connecting a CAN-ST compatible accessory, excluding anyother connection such as LAN, Ethernet, ISDN, etc.The RCC-02/-03 control centre is vital for modifying the parameters of the system. Many parametersand features are not described in this manual. The manual for the RCC-01/03 (downloadable onwww.studer-innotec.com) describes in detail each of these parameters and the context in whichthey can be used.It also allows the following functions: Display of function synopsis Display of the measured operational values (current / voltage / power output, etc.) Updating of software or implementation of customised software Upload/download of inverter parameter Updating of inverter parameters Events logging of error message Data acquisition of Xtender and other participants connected to the communication buslike the BSP (Battery status processor) or / and compatible solar charge controllerRCC-02 RCC-03The features of the RCC-02 and the RCC-03 are the same. They only differ in their externalappearance. The RCC-02 is designed for wall mounting, whereas the RCC-03 is designed as a boarddevice.The RCC-03 model must be removed from the board to allow access to the SD card slot (duringupdating, for example).Model N°: RCC-02: Dimensions: H x W x D / / 170 x 168 x 43.5mmRCC-03: Dimensions: H x W x D / / 130 x 120 x 42.2mmThe two remote control models are delivered with a 2 m cable.Cables of specific lengths (5 m, 20 m and 50 m) can be ordered.The article no. is as follows: CAB-RJ45-xx. The length in metres is specified as xx. |
manualsdatabase
Your AI-powered manual search engine