Xtender XTS 900-12 User Manual
                                                        | |
Contents
| 
Studer Innotec SAXtenderUser manual V4.6.0 4720 TABLE OF FACTORY DEFAULT PARAMETER SETTINGSAccesslevelParam.N° Denomination / description Fact. value2 Mod.valueBasic 1107 Maximum current of AC source (Input limit) 32 AacExpert 1108 Battery undervoltage level without load 11.6/23.2/46.3 VdcExpert 1109 Battery undervoltage level at full load 10.5/21/42 VdcExpert 1110 Restart voltage after batteries undervoltage 12/24/48 VdcExpert 1111 Autostart to the battery connection NoExpert 1112 Inverter frequency 50 HzExpert 1121 Battery overvoltage level 17/34.1/68.2 VdcExpert 1122 Restart voltage level after an battery overvoltage 16.2/32.4/64.8 VdcBasic 1124 Inverter allowed YesExpert 1125 Charger allowed YesBasic 1126 Smart-Boost allowed YesExpert 1127 Grid feeding allowed NoExpert 1128 Transfer relay allowed YesExpert 1130 After battery undervoltage YesExpert 1131 After battery overvoltage YesExpert 1132 After inverter or Smart-Boost overload YesExpert 1134 After overtemperature YesBasic 1138 Battery charge current 60 AdcExpert 1139 Temperature compensation -3 mV/°C/cellExpert 1140 Floating voltage 13.6/27.2/54.4 VdcExpert 1142 Force a new cycle -Expert 1143 Voltage level 1 to start a new cycle 12.5/25/49.9 VdcExpert 1144 Time period under voltage level 1 to start a new cycle 30 minExpert 1145 Voltage level 2 to start a new cycle 12.3/24.6/49.2 VdcExpert 1146 Time period under voltage level 2 to start a new cycle 60 secExpert 1147 Cycling restricted NoExpert 1148 Minimal delay between cycles 3 hoursExpert 1149 New cycle priority on absorption and equalizationphasesNoExpert 1155 Absorption phase allowed YesExpert 1156 Absorption voltage 14.4/28.8/57.6 VdcExpert 1157 Absorption duration 2 hoursExpert 1158 End of absorption triggered with current NoExpert 1159 Current limit to quit the absorption phase 4 AdcExpert 1160 Maximal frequency of absorption control NoExpert 1161 Minimal delay since last absorption 2 hoursExpert 1162 Force equalization -Expert 1163 Equalization allowed NoExpert 1164 Equalization voltage 15.6/31.2/62.4 VdcExpert 1165 Equalization duration 0.5 hoursExpert 1166 Number of cycles before an equalization 25Expert 1168 End of equalization triggered with current NoExpert 1169 Current threshold to end equalization phase 4 AdcExpert 1170 Reduced floating allowed NoExpert 1171 Floating duration before reduced floating 1 daysExpert 1172 Reduced floating voltage 13.2/26.4/52.8 VdcExpert 1173 Periodic absorption allowed NoExpert 1174 Periodic absorption voltage 14.4/28.8/57.6 VdcExpert 1175 Reduced floating duration before periodic absorption 7 daysExpert 1176 Periodic absorption duration 0.5 hoursBasic 1187 Standby level 10%2 The second value concerns the 120Vac ranges |
manualsdatabase
Your AI-powered manual search engine