8 System SetupDX100 8.15 Numeric Key Customize Function8-112– The instruction corresponding to the I/O control allocated by keyallocation (SIM) is displayed in the “ALLOCATION CONTENT”.– The allocated instruction changes automatically when“ALLOCATION CONTENT” is changed by key allocation (SIM).Even if the I/O control allocation is changed to the default settingallocated by the manufacturer with key allocation (SIM), the settingsfor key allocation (EACH) remain the same.8.15.5 Execution of Allocation8.15.5.1 Executing the Instruction/Output Control Allocation1. Press the key allocated for instruction allocation or output controlallocation.– The allocated instruction is displayed in the input buffer line.2. Press [INSERT] and [ENTER].– The instruction displayed in the input buffer line is registered.8.15.5.2 Executing the Job Call Allocation1. Press the key allocated for the job call allocation.– The CALL instruction is displayed in the input buffer line.2. Press [INSERT] then [ENTER].– The CALL instruction shown in the input buffer line is registered.8.15.5.3 Executing the Display Allocation1. Press the key allocated for the display allocation.– The allocated display appears.8.15.5.4 Executing the I/O Control AllocationAlternate output allocation, momentary output allocation, pulse outputallocation, group output allocation (4-bit/8-bit), analog output allocation,长沙工控帮教育科技有限公司工控帮助教小舒QQ:2823408167
