www.dadehpardazan.ir 88594014-154.5 Connecting a Safety Function Device4-54 Safety Function4.5 Connecting a Safety Function DeviceThere are the following two types of safety function’s jumper connectors that are pro-vided with the SERVOPACKs. The safety function’s jumper connector must beremoved to attach a safety function device. Read the following procedure carefullyand then attach the safety function device.Connect a safety function device using the following procedure.1. Remove the servomotor connection terminal connector while pressingthe lock.Applicable SERVOPACKs: SGDV-R70F, -R90F, -2R1F, -R70A, -R90A, -1R6A, -2R8A, -1R9D, -3R5D, -5R4DFor SERVOPACK models not listed above, it is not necessary to remove theservomotor connection terminal connector. Go to step 2.Previous model New modelServomotorconnectionterminal connectorEnlarged ViewLock1㧚Press the lock.2㧚Remove the servomotorconnection terminal connectorwhile pressing the lock.
