www.dadehpardazan.ir 88594014-152 Installation2.2.3 SGLTW and SGLTM Linear Servomotors (T-type Iron Core)2-142.2.3 SGLTW and SGLTM Linear Servomotors (T-type Iron Core)(1) Magnetic Way InstallationThe SGLTM magnetic way is packed with two yokes securely positioned with an aluminum spacer.Use the following procedure to install the SGLTM magnetic way.1. With the spacers attached, place the magnetic way on both positioningsteps. Make sure that the machine and magnetic way are not scratchedor dented when positioning the magnetic way. Set the dimensions ofthese positioning steps to match the W2 dimensions in the followingtable.Do not remove the spacers until the magnetic way is temporarily fixedto the system.Magnetic WayModel SGLTM-Dimensions in mmW1(Dimensions at shipment)W2(Recommended machinebase value)20 71.5 1 70 0.153540 113 1 111.8 0.158035H 91.5 1 90 0.1550HSpacer Caution!Magnetic force!
