5.4 Operator Programming ErrorsAn Operator Programming Error (oPE) occurs when an inappropriate parameter is set or anindividual parameter setting is inappropriate.u oPE Codes, Causes, and Possible SolutionsTable 5.4 oPE Codes, Causes, and Possible SolutionsLED Operator Display Error NameoPE01 Drive Capacity Setting FaultDrive capacity and the value set to o2-04 do not match.oPE02 Parameter Range Setting ErrorUse U1-18 to find parameters set outside the range.oPE03Multi-Function Input Selection ErrorA contradictory setting is assigned to multi-functioncontact inputs H1-01 to H1-07.oPE04 Initialization required.oPE05 Run Command/Frequency Reference Source SelectionErroroPE07Multi-Function Analog Input Selection ErrorA contradictory setting is assigned to multi-functionanalog inputs H3-02 through to H3-10 and PID functionsconflict.oPE08Parameter Selection ErrorA function has been set that cannot be used in the motorcontrol method selected.oPE09PID Control Selection FaultPID control function selection is incorrect. Requires thatPID control is enabled (b5-01 = 1 to 4).oPE10V/f Data Setting ErrorThe following setting errors have occurred where: E1-04is greater than or equal to E1-06 is greater than or equal toE1-07 is greater than or equal to E1-09.Or the following setting errors have occurred: E3-04 isgreater than or equal to E3-06 is greater than or equal toE3-07 is greater than or equal to E3-09.oPE11 Carrier Frequency Setting ErrorCorrect the setting for the carrier frequency.oPE13Pulse Monitor Selection ErrorIncorrect setting of monitor selection for Pulse Train(H6-06).5.4 Operator Programming ErrorsYASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide 1495 Troubleshooting
