No. Name DescriptionF6-67Dynamic Output Assembly 159Parameter 1Note: Function available in versionsPRG: 1012 and earlier. Refer to V1000 Technical Manual for details.Dynamic Output Assembly 109Parameter 4Note: Function available in versionsPRG: 1014 and later.F6-68Dynamic Output Assembly 159Parameter 2Note: Function available in versionsPRG: 1012 and earlier. Refer to V1000 Technical Manual for details.Dynamic Output Assembly 159Parameter 1Note: Function available in versionsPRG: 1014 and later.F6-69Dynamic Output Assembly 159Parameter 3Note: Function available in versionsPRG: 1012 and earlier. Refer to V1000 Technical Manual for details.Dynamic Output Assembly 159Parameter 2Note: Function available in versionsPRG: 1014 and later.F6-70Dynamic Output Assembly 159Parameter 4Note: Function available in versionsPRG: 1012 and earlier. Refer to V1000 Technical Manual for details.Dynamic Output Assembly 159Parameter 3Note: Function available in versionsPRG: 1014 and later.F6-71Dynamic Output Assembly 159Parameter 4Note: Function available in versionsPRG: 1014 and later.Refer to V1000 Technical Manual for details.F7: EtherNet/IP and Modbus TCP/IP Option ParametersUse F7 parameters to program the drive for EtherNet communication.F7-01 toF7-42 EtherNet/IP and Modbus TCP/IPOption ParametersF7 parameters are reserved for use with SI-EN3/V and SI-EM3/Voptions. Refer to the respective Option Installation Manuals fordetails.No. Name DescriptionH1: Multi-Function Digital InputH1 parameters to assign functions to the multi-function digital input terminals. Unused terminals should be set to “F”.H1-01 Multi-Function Digital Input Terminal S1 Function Selection Selects function of terminal S1H1-02 Multi-Function Digital Input Terminal S2 Function Selection Selects function of terminal S2B.1 Parameter TableYASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide 181B Parameter List
