Yaesu FT-1900E Operating Manual

37FT-1900E OPERATING MANUALMEMORY O PERATIONLABELING M EMORIESYou may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to aid inrecollection of the channel’s use (such as club name, etc.). This is easily accomplishedusing the Set (Menu) mode.1. Recall the memory channel on which you wish to append alabel.2. Press and hold in the [MHz(SET)] key for one second, thenrotate the DIAL knob to select “30 NM SET.”3. Press the [MHz(SET)] key. You will notice the first char-acter location blinking, indicating that you are now in theAlpha-Numeric (“A/N”) entry mode. Within the A/N entrymode, rotate the DIAL knob to select characters; pressingthe [LOW(A/N)] key will move the character’s entry location to the right.4. Rotate the DIAL knob to select the desired number, letter,or symbol, then press the [LOW(A/N)] key to move thenext character’s location. Move two slots if you want to put in a space. Press the[REV(DW)] key if you want to “backspace” one slot.5. Repeat step 4, as necessary, to complete the name tag (up to six characters) for yourmemory, then press the [MHz(SET)] key momentarily tosave the A/N name just entered.6. Press and hold in the [MHz(SET)] key for one second to exit to normal operation.While operating in the Memory Recall mode, press and hold inthe [LOW(A/N)] key for one second to toggle the display be-tween indication of the frequency and the channel’s Alpha/Nu-meric label.